Smart Mixing Ice Cream Gelato Technology Design to Develop MSMEs Business
DOI:
https://doi.org/10.56862/irajtma.v4i3.340Keywords:
Technology, Mixer, Gelato, UMKM.Abstract
Gelato has become a trendy dessert, gaining popularity in the market. However, few UMKM are involved in making contemporary gelato. One reason is the high cost of equipment and the need for special techniques. The success of a gelato product is largely determined by the dough used. Given this situation, UMKM should start using technology to produce gelato dough with higher quality and consistency. The design method for creating gelato dough mixer technology that meets UMKM needs includes problem identification, field studies, design, prototyping, assembly, and analysis. This technology is expected to create an effective, efficient, and high-quality production process. This technology serves not only for stirring but also as a chopper for fruit or other gelato ingredients. This gelato dough mixer technology chops the gelato topping ingredients, which then automatically fall into the gelato mixing chamber and are churned into gelato. The mixing chamber can accommodate a single production process of 30 kg. After mixing is complete, the gelato is removed from the mixing tube through the provided channel, and the results are stored in a container so the packing process can continue.
References
Akyazi, T., A. Goti, A. Oyarbide-Zubillaga, E. Alberdi, and F. Bayón. 2020. “A Guide for the Food Industry to Meet the Future Skills Requirements Emerging with Industry 4.0.” Foods 9 (4): 492. https://doi.org/10.3390/foods9040492.
Arie, H. A., and A. M. Fikry. 2021. “Development of Synergistic Relationships between MSMEs and Digital Society in Indonesia.” Ho Chi Minh City Open University Journal of Science – Economics and Business Administration 11 (2): 18–30. https://doi.org/10.46223/hcmcoujs.econ.en.11.2.1934.2021.
Asioli, D., J. Aschemann-Witzel, V. Caputo, R. Vecchio, A. Annunziata, T. Næs, and P. Varela. 2017. “Making Sense of the ‘Clean Label’ Trends: A Review of Consumer Food Choice Behavior and Discussion of Industry Implications.” Food Research International 99: 58–71. https://doi.org/10.1016/j.foodres.2017.07.022.
Bhakti, C. P., and N. Hidayat. 2018. “Pelatihan Pembuatan Kripik Daun Kersen Masyarakat Balirejo, Muja-Muju, Umbulharjo, Yogyakarta.” Jurnal Pemberdayaan: Publikasi Hasil Pengabdian kepada Masyarakat 2 (1): 165–170. https://doi.org/10.12928/jp.v2i1.451.
Firmansyah, F., and D. Hartono. 2023. “Digitalization and Productivity: Evidence on Indonesian Large and Medium Industries.” International Journal of Current Science Research and Review 6 (1). https://doi.org/10.47191/ijcsrr/v6-i1-78.
Franceschelli, M. V., G. Santoro, and E. Candelo. 2018. “Business Model Innovation for Sustainability: A Food Start-Up Case Study.” British Food Journal 120 (10): 2483–2494. https://doi.org/10.1108/BFJ-01-2018-0049.
Gani, N. 2024. “Optimising Human Resource Information Systems in the Context of MSME Technology Management.” Jurnal Informasi dan Teknologi 6 (1): 302–309. https://doi.org/10.60083/jidt.v6i1.519.
Hendarsyah, D. 2019. “E-Commerce di Era Industri 4.0 dan Society 5.0.” Iqtishaduna: Jurnal Ilmiah Ekonomi Kita 8 (2): 171–184. https://doi.org/10.46367/iqtishaduna.v8i2.170.
Hendrawan, S. A. 2024. “Digital Transformation in MSMEs: Challenges and Opportunities in Technology Management.” Jurnal Informasi dan Teknologi 6 (2): 141–149. https://doi.org/10.60083/jidt.v6i2.551.
JS, A. M., L. Hidayati, N. A. Sunaryo, R. Nurmalasari, C. N. Izza, and A. L. Syafi’i. 2022. “Pelatihan Pengolahan Jeruk untuk Meningkatkan Keterampilan Ibu Rumah Tangga di Desa Sumbersekar Dau Malang.” Prosiding Hapemas 3 (1): 161–164. https://conference.um.ac.id/index.php/hapemas/article/view/3669.
Lane, N. 2021. “Manufacturing Revolutions: Industrial Policy and Industrialization in South Korea.” https://doi.org/10.31235/osf.io/6tqax.
Ma’ali El Hadi, R., M. A. Pulungan, and F. Budinam. 2023. “Rekayasa Teknologi Mesin Perah Susu Sapi Multifungsi Siap Minum Langsung.” Prosiding Konferensi Nasional Pengabdian kepada Masyarakat dan Corporate Social Responsibility (PKM-CSR) 6: 1–5. https://doi.org/10.37695/pkmcsr.v6i0.2171.
Marsono, M., Y. Yoto, A. Nafiah, and R. Nurmalasari. 2023. “Calibration of the Travel Resolution Stepper Motor Machines of CNC-Based Batik Robot Running GRBL Firmware.” AIP Conference Proceedings 2590 (1). https://doi.org/10.1063/5.0106246.
Nabati, E. G., M. T. A. Nieto, D. Bode, T. F. Schindler, A. Decker, and K.-D. Thoben. 2022. “Challenges of Manufacturing for Energy Efficiency: Towards a Systematic Approach through Applications of Machine Learning.” Production 32. https://doi.org/10.1590/0103-6513.20210147.
Nurhapsari, R., and E. Sholihah. 2022. “Analysis of the Factors of Intention to Use QRIS for MSMEs in Semarang City’s Traditional Market.” Jurnal Ekonomi Modernisasi 18 (2): 199–211. https://doi.org/10.21067/jem.v18i2.7291.
Nurmalasari, R., N. A. Sunaryo, V. M. Ramadhani, G. V. P. P. S., and A. M. JS. 2023. “Teknologi Penggiling Kotoran Hewan untuk Optimasi Pengolahan Limbah Ternak di Desa Bulupitu Kabupaten Malang.” Prosiding Seminar Nasional UNARS 2 (1): 101–106.
Nurmalasari, R., S. T. Yoto, and S. P. T. Marsono. 2021a. Modul Elemen Mesin (Manufaktur). Kediri: Penerbit Qiara Media.
———. 2021b. Robotika Manufaktur Berbasis CNC untuk Penguatan Otomasi Industri. Kediri: Penerbit Qiara Media.
Nurmalasari, R., M. Marji, N. A. Sunaryo, and G. V. P. P. S. 2024. “Automatic Oven Berbasis Smart Sensor untuk Meningkatkan Produktivitas UMKM Bidang Kuliner di Malang.” IRA Jurnal Pengabdian kepada Masyarakat (IRAJPKM) 2 (3): 21–26. https://doi.org/10.56862/irajpkm.v2i3.142.
Pasaribu, M. N. H., E. Eswanto, S. Januariyansah, I. Iswandi, and M. Y. R. Siahaan. 2025. “Pelatihan Pengelasan SMAW bagi Warga Muda di Desa Silinda, Serdang Bedagai, Sumatera Utara.” IRA Jurnal Pengabdian kepada Masyarakat (IRAJPKM) 3 (1): 10–15. https://doi.org/10.56862/irajpkm.v3i1.186.
Radchenko, A., G. Dyukareva, T. P. Afanasyeva, A. Kornitskaya, S. Yakubyan, and S. Karapandzha. 2020. “Competency-Based Approach in Higher Education: Competency-Based Model of the Engineer for the Food Industry.” ScienceRise 3: 58–65. https://doi.org/10.21303/2313-8416.2020.001344.
Rusmini, R., M. Syarofi, S. N. Baiti, M. S. Huda, and S. N. Azizah. 2023. “Pemberdayaan Ekonomi Masyarakat dengan Pemanfaatan Hasil Pertanian Jeruk Bangle Menjadi Olahan Makanan Selai Jeruk.” Reswara: Jurnal Pengabdian kepada Masyarakat 4 (1): 689–696.
Sunaryo, N. A., S. Soekopitojo, A. M. J. Saputri, R. Nurmalasari, T. E. Amanda, A. Nurzaman, N. N. Afnany, T. S. JA, and T. M. Naufal. 2022. “Pelatihan Pemasaran dan Pengemasan Produk Kuliner bagi Wanita Kelompok Tani Desa Srigading Kabupaten Malang.” Dalam Prosiding Seminar Nasional Pengabdian kepada Masyarakat Fakultas Bahasa Asing Universitas Mahasaraswati Denpasar (SENADIBA) 2021, 315–320.
Sutadji, E., R. Nurmalasari, and A. Nafiah. 2021. Dinamika Pengembangan Destinasi Wisata: Berbasis Masyarakat Era 4.0. Malang: Media Nusa Creative.
———. 2022. “Pengembangan Potensi Wisata melalui Pembangunan Healthy Playground Ergonomis di Kawasan Bedengan.” Jurnal Graha Pengabdian 3 (3): 206–211.
Yanti, E. M. 2024. “Impacts of Government Policies, Technological Innovation, and Competitive Advantage on Post-Pandemic MSME Financial Performance.” Business Review and Case Studies 5 (1). https://doi.org/10.17358/brcs.5.1.81.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
