Thermal Analysis of a Refrigerator with Variations in Insulation Type Thickness in Tropical Climates

Authors

  • Muhammad Azril Rahmaditya Universitas Singaperbangsa Karawang
  • Boni Sena Universitas Singaperbangsa Karawang
  • Farradina Choria Suci Universitas Singaperbangsa Karawang
  • Ihsan naufal firdaus Universitas Singaperbangsa Karawang
  • Faishal Dzaky Al Hakim Universitas Singaperbangsa Karawang
  • Dimas Bahrudin Universitas Singaperbangsa Karawang
  • Ridwan Abdul Hakim Universitas Singaperbangsa Karawang
  • Muhamad Ilham Saputra Universitas Singaperbangsa Karawang

DOI:

https://doi.org/10.56862/irajtma.v5i1.418

Keywords:

Domestic refrigerator, Thermal insulation, PU, EPS, VIP, Energy consumption.

Abstract

Cutting speed is a crucial parameter in the turning process that significantly affects the final quality of the workpiece surface. This study aims to evaluate the impact of cutting speed variations on the surface roughness level of AISI 1018 steel. The machining process was carried out using a chisel with a tip radius of 1.2mm, and the cutting speed was varied at three levels, namely 42m/min, 66m/min, and 105m/min. Surface roughness measurements were carried out using a Surface Roughness Tester. The experimental results showed that increasing cutting speed tended to decrease surface roughness. The lowest roughness value of 2.224 μm was obtained at a cutting speed of 105 m/min. This phenomenon occurs because, at higher cutting speeds, cutting forces and vibrations are reduced, making the machining process more stable and producing better surface quality. This study shows that cutting parameters play an important role in optimizing the final results of conventional turning processes.

References

Baskaran, A., N. Manikandan, N. Nagaprasad, dan Krishnaraj Ramaswamy. 2023. "Second Law Assessment of Di Methyl Ether and Its Mixtures in Domestic Refrigeration System." Scientific Reports 13: 275. https://doi.org/10.1038/s41598-023-27600-9.

Borikar, Sanjaykumar A., Mahendra M. Gupta, Mashhour A. Alazwari, Prateek Malwe, Essam Moustafa, Hitesh Panchal, dan Ammar H. Elsheikh. 2021. "A Case Study on Experimental and Statistical Analysis of Energy Consumption of Domestic Refrigerator." Case Studies in Thermal Engineering 28: 101636. https://doi.org/10.1016/j.csite.2021.101636.

Boryera, Paul O., Oluwarotimi Olofinnade, Shallom Olojede, dan Kennedy Onyelowe. 2025. "Enhancing the Thermal Performance of Expanded Polystyrene with Radiant Barrier Foil Boards for Improved Building Insulation." Scientific Reports 15: 21567. https://doi.org/10.1038/s41598-025-04247-2.

Bozicek, David, Jitka Peterkova, Jiri Zach, dan Mitja Kosir. 2024. "Vacuum Insulation Panels: An Overview of Research Literature with an Emphasis on Environmental and Economic Studies for Building Applications." Renewable and Sustainable Energy Reviews 189: 113849. https://doi.org/10.1016/j.rser.2023.113849.

Harun-Or-Rashid, Mohammad, Md Tawfique Hasan, Towfiq Bin Alam, dan Safayet Hossain. 2024. "Energy Efficient Refrigeration System Using Latent Heat Storage, PCM." International Journal of Thermofluids 23: 100717. https://doi.org/10.1016/j.ijft.2024.100717.

Ibrahim, Osama Abd Al-Munaf, Saif Ali Kadhim, Karrar A. Hammoodi, Farhan Lafta Rashid, dan Ali Habeeb Askar. 2024. "Review of Hydrocarbon Refrigerants as Drop-in Alternatives to High-GWP Refrigerants in VCR Systems: The Case of R290." Cleaner Engineering and Technology 23: 100825. https://doi.org/10.1016/j.clet.2024.100825.

Kadhim, Saif Ali. 2024. "Thermodynamic and Environmental Analysis of Hydrocarbon Refrigerants as Alternatives to R134a in Domestic Refrigerator." International Journal of Thermodynamics 27 (2): 10-18. https://doi.org/10.5541/ijot.1368985.

Kazmi, Ashfaq, Jaedeok Ko, dan Ji Hwan Jeong. 2026. "Energy-Saving Potential of an R600a Household Refrigerator through Mixing with R290 and Adjusting Compressor Revolution Speed." Case Studies in Thermal Engineering 77: 107549. https://doi.org/10.1016/j.csite.2025.107549.

Kumar, Manav, Kumar K. Kiran, Sharifuddin Mondal, dan Mohammad Amir Khan. 2024. "Performance Evaluation of Evaporator Coil of a Domestic Refrigerator under Frosting." International Journal of Low-Carbon Technologies 19: 2746-54. https://doi.org/10.1093/ijlct/ctae232.

Mane, Laxman N., dan Pradeep A. Patil. 2024. "Experimental Investigation of the Effect of Phase Change Material on Backup Time and Equivalent Energy Consumption of Domestic Refrigerator." Energy Storage and Saving 3 (4). https://doi.org/10.1016/j.enss.2024.07.001.

Marques, Daniel Lemos, Nelson Martins, dan F. Neto. 2025. "Powering the Future: Releasing the Potential of Phase Change Materials in Domestic Refrigeration Systems to Store Renewable Energy." Applied Thermal Engineering 264: 125421. https://doi.org/10.1016/j.applthermaleng.2025.125421.

Murugan, Muneeshwaran, Cheng-Min Yang, Kashif Nawaz, dan Chi-Chuan Wang. 2023. "Understanding Airflow Pattern and Temperature Distribution in Domestic Refrigerators: A Review Analyzing Recent Developments and Bridging Knowledge Gaps." Sustainable Energy Technologies and Assessments 57: 103171. https://doi.org/10.1016/j.seta.2023.103171.

Rahimi, M., A. A. Ranjbar, dan M. J. Hosseini. 2023. "Experimental Investigation on PCM/Fin Slab Incorporation in a Evaporator Side of a Household Refrigerator." Energy Reports 10: 407-18. https://doi.org/10.1016/j.egyr.2023.06.053.

Ram, Pommala Teja Vamsi, dan G. Prasanthi. 2024. "Refrigerator Performance Enhancement with Nanoparticle Infused Phase Change Material." Indian Journal of Science and Technology 17 (45): 4778-86. https://doi.org/10.17485/IJST/v17i45.3315.

Samir, Sami, Mahmoud Salem, A. S. A. Mohamed, dan Ahmed Askalany. 2026. "Utilizing of KNO3, KCl, and NaCl as Phase Change Materials within the Refrigerator for Energy Saving." Scientific Reports 16: 9815. https://doi.org/10.1038/s41598-026-41662-5.

Sarrafzadeh Javadi, Farhood, dan Rahman Saidur. 2021. "Thermodynamic and Energy Efficiency Analysis of a Domestic Refrigerator Using Al2O3 Nano-Refrigerant." Sustainability 13 (10): 5659. https://doi.org/10.3390/su13105659.

Shi, Mingxiao, Lixia Yang, Zhaofeng Chen, Ankang Kan, Shijie Chen, Tianhao He, dan Jiaxiang Zhang. 2023. "Impacts Investigation of Gas Barrier on Effective Thermal Conductivity and Service Life of Vacuum Insulation Panel." Scientific Reports 13: 20055. https://doi.org/10.1038/s41598-023-44929-3.

Soloveva, Olga V., Sergei A. Solovev, Yuri V. Vankov, dan Rozalina Z. Shakurova. 2022. "Experimental Studies of the Effective Thermal Conductivity of Polyurethane Foams with Different Morphologies." Processes 10 (11): 2257. https://doi.org/10.3390/pr10112257.

Sudarma, Andi Firdaus, Henry Carles, Azmi Azhar, Muhammad Akmal, dan Alfa Firdaus Sirait. 2025. "Performance Analysis of R600a as a Replacement for R134a in a Household Refrigeration System." Jurnal Teknik Mesin / Journal of Mechanical Engineering 14 (2): 99-108. https://doi.org/10.22441/jtm.v14i2.32326.

Wang, Juan, Zhibin Pei, dan Ningning Zhou. 2025. "Rational Design of Nanostructured Porous and Advanced Getter Materials for Vacuum Insulation Panels." Nanomaterials 15 (7): 532. https://doi.org/10.3390/nano15070532.

Published

2026-04-30

How to Cite

Muhammad Azril Rahmaditya, Boni Sena, Farradina Choria Suci, Ihsan naufal firdaus, Faishal Dzaky Al Hakim, Dimas Bahrudin, Ridwan Abdul Hakim, & Muhamad Ilham Saputra. (2026). Thermal Analysis of a Refrigerator with Variations in Insulation Type Thickness in Tropical Climates. IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA), 5(1), 242–249. https://doi.org/10.56862/irajtma.v5i1.418

Issue

Section

Scientific Article