Performance Test of Stirling Engine LPG Gas Burner with Variation of Airflow Rate
DOI:
https://doi.org/10.56862/irajtma.v1i2.19Keywords:
Burner, Performance, stirling engine, water boiling testAbstract
A burner is a tool used to heat the heater as a source of initial heat whose heat functions to drive the Stirling engine. The burner used in this test is self-designed. The purpose of this study was to determine the temperature profile, fuel consumption used, power on the burner, and the efficiency of the Stirling engine burner with variations in air flow rates. Variations in the airflow rate used in this study were 2 m/s, 2.5 m/s, and 3 m/s. This research method was carried out experimentally and analyzed by the water boiling test method. The results of the three variations of air flow rate show that the highest temperature occurs in the Stirling engine burner with an airflow rate of 3 m/s of 813,815℃, for fuel consumption with variations in air flow rate of 343 gr, Stirling engine burner power with variations in air flow rate 2 m/s, 2.5 m/s, and 3 m/s produce the same power of 4.48 kW, and the highest efficiency on the Stirling engine burner is obtained at an airflow rate of 3 m/s of 38.33%.
References
Akbar, Fadhilah Muhammad, and Dede Buchori Muslim. n.d. “Perancangan Prototipe Mesin Stirling Tipe Beta,” no. 21: 1–10.
Direktorat Jenderal Minyak dan Gas Bumi. 2007. Konversi Mitan Ke Gas. Jakarta: Kementerian Energi Dan Sumber Daya Mineral. https://migas.esdm.go.id/uploads/Konversi-Mitan-GAS.pdf.
Hari S. Ritonga, Farel H. Napitupulu, Tulus B. Sitorus, and M. Syahril Gultom. 2019. “Rancang Bangun Mesin Stirling Tipe Gama Berkapasitas 157 Ml Menggunakan Sistem Pendingin Fluida Cair.” Dinamis 7 (1): 9. https://doi.org/10.32734/dinamis.v7i1.7145.
Jufrizal, Farel H. Napitupulu, Ilmi, and Himsar Ambarita. 2020. “Manufacturing and Testing Prototype of a Gamma Type Stirling Engine for Micro-CHP Application.” In IOP Conference Series: Materials Science and Engineering, 725:1–9. https://doi.org/10.1088/1757-899X/725/1/012016.
Jufrizal, Farel H. Napitupulu, Ilmi, Himsar Ambarita, and Mahadi Meliala. 2022a. “Ideal Cycle Thermodynamic Analysis for Gamma-Type Stirling Engine.” Journal of Mechanical Engineering and Technology (JMET) 14 (1): 11–26. https://journal.utem.edu.my/index.php/jmet/article/view/6246.
———. 2022b. “Thermodynamic Analysis of a Gamma-Type Stirling Engine for MCHP Application.” In Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), edited by Mohd Fadzli Bin Abdollah, Hilmi Amiruddin, Amrik Singh Phuman Singh, Fudhail Abdul Munir, and Asriana Ibrahim, 225–229. Melaka, Malaysia: Springer Nature Singapore. https://link.springer.com/chapter/10.1007/978-981-19-3179-6_40.
Mawardi, Jufrizal, Muhammad Hidayah. 2022. “Uji Kinerja Burner LPG Mesin Stirling Dengan Variasi Kosumsi Bahan Bakar LPG Burner.” IRA J.Tek. Mesin Dan Apl 1 (1): 35–40.
Setiawan, Yudi, Eka Sariwijianti, and Teguh Pribadi. 2019. “Kinerja Kompor Gas.” Flywheel : Jurnal Teknik Mesin Untirta V (1): 90–93.
Siregar, Z H, Jufrizal, Moraida Hasanah, and M D Agusdiandy. 2022. “Pengaruh Variasi Temperatur Sumber Panas Terhadap Temperatur Udara Dalam Heater Mesin Stirling. ” IRA J.Tek. Mesin Dan Apl 1 (1): 11–16.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
