Strength Analysis of 3D Printer Results with Acrylonitrile Butadiene Styrene (ABS) Filament Based on Nozzle Temperature Variations and Infill Type
DOI:
https://doi.org/10.56862/irajtma.v4i2.247Keywords:
3D printing, Acrylonitrile Butadiene Styrene, Infill type, Nozzle temperatureAbstract
Technological advancements, including 3D printing, enable the creation of prototypes from digital designs using 3D printers. A popular method is Fused Deposition Modeling (FDM) with thermoplastic materials such as Acrylonitrile Butadiene Styrene (ABS), valued for its quality and affordability. In 3D printing, nozzle temperature and infill type influence the mechanical properties of printed objects. This study aims to determine the tensile strength of ABS with variations in nozzle temperature and infill type. Tensile test results show that a 230°C nozzle temperature produces higher yield strength for most infill types compared to 240°C. The 240°C setting tends to increase maximum tensile strength for grid and concentric infills, but not for gyroid and lines. The concentric infill type exhibited the highest elongation at both temperatures, indicating greater ductility compared to other infill types. These findings are expected to serve as a reference for optimizing printing parameters.
References
Adi, P., D. Hodzic, dan A. Milovanovic. 2019. “Effect of Infill Type and Density on Tensile Properties of PLA Material for FDM Process.” 30th DAAAM International Symposium on Intelligent Manufacturing and Automation Proceedings: 545–554. https://doi.org/10.2507/30th.daaam.proceedings.074.
ASTM D 638-14. 2019. Standard Test Method for Tensile Properties of Plastics. ASTM International, United States.
Cristian, D., dan R. Laszlo. 2017. “Effects of Raster Orientation, Infill Rate and Infill Pattern on the Mechanical Properties of 3D Printed Materials.” De Gruyter LXIX: 23–30. https://doi.org/10.1515/aucts-2017-0004.
Dimas, W., B. Maryanti, dan K. Arifin. 2022. “Analisis Perbandingan Kekuatan Tarik Hasil 3D Printing Dengan Filamen Berbahan ABS dan Nilon.” Jurnal Rekayasa Mesin dan Inovasi Teknologi 3: 208–213.
Finali, A., A. F. Hanafi, dan P. U. R. Eko. 2020. “Analisis Variasi Pattern 3D Printing terhadap Kekuatan Tarik.” Jurnal Kajian Ilmiah dan Teknologi Teknik Mesin (J-Proteksion) 5 (1): 16–19. Google Scholarjournal.univpancasila.ac.id
Karuniawan, B., W. F. Rachman, dan M. T. Yoningtias. 2022. “Metode Taguchi untuk Optimasi Parameter Mesin Printer 3D.” Austenit 14: 61–68. https://doi.org/10.53893/austenit.v14i2.4631.
Nugroho, S. A., dan A. A. Magriyanti. 2020. “Perkembangan Teknologi dalam Proses Percetakan 3 Dimensi dan Aplikasinya.” Jurnal Ilmiah Komputer Grafis (Pixel) 13 (1): 61–68. https://doi.org/10.51903/pixel.v13i1.194 journal.stekom.ac.id+1
Pranata, Y., Hasdiansah, dan Y. F. Arriyani. 2022. “Pengujian Kuat Tarik Produk Cetak 3D Printing.” Prosiding Seminar Nasional Inovasi Teknologi Terapan: 85–91.
Pristiansyah, Hasdiansah, dan A. Ferdiansyah. 2022. “Pengaruh Parameter Proses pada 3D Printing FDM terhadap Kekuatan Tarik Filament ABS CCTREE.” Jurnal Teknologi Manufaktur 1: 15–22. https://doi.org/10.33504/manutech.v14i01.210.
Rismalia, M., S. C. Hidajat, I. G. R. Permana, B. Hadisujoto, M. Muslimin, dan F. Triawan. 2019. “Infill Pattern and Density Effects on the Tensile Properties of 3D Printed PLA Material.” Journal of Physics: Conference Series 1402 (4): 044041. https://doi.org/10.1088/1742-6596/1402/4/044041.
Suzen, Z. S., Hasdiansah, dan Yulianto. 2020. “Pengaruh Jenis Isian dan Temperatur Nozzle terhadap Kekuatan Tarik Produk 3D Printing Filamen PLA+ Esun.” Jurnal Teknologi Manufaktur 12: 73–80. https://doi.org/10.33504/manutech.v12i2.133.
Syaefudin, E. A., A. Kholil, M. Hakim, D. A. Wulandari, Riyadi, dan E. Martinugraha. 2023. “The Effect of Orientation on Tensile Strength 3D Printing with ABS and PLA Materials.” Journal of Physics: Conference Series 2596 (1): 012002. https://doi.org/10.1088/1742-6596/2596/1/012002.
Tanoto, Y. Y., V. Filbert, R. Febrian, dan N. Adriel. 2022. “Optimasi Multirespon pada Proses 3D Printing Material ABS.” Jurnal Ilmiah Bidang Ilmu Kerekayasaan 43: 147–157. https://doi.org/10.14710/teknik.v43i2.43301.
Tangkuman, S. 2019. Mekanika Kekuatan Material: Dasar Perancangan Mekanikal. Manado: Unsrat Press.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
