Working Test of Coconut Shell Chopping Machine Based on Pulley Difference
DOI:
https://doi.org/10.56862/irajtma.v2i2.54Keywords:
Coconut husk, Puli, Coconut husk shreeding machineAbstract
Coconut husk, currently processed into coco fibre and cocopeat is the highest percentage of coconut fruit waste. A coconut husk chopping machine is a machine that can chop coconut husk so that it can then be utilized as a planting medium. Pulley has a function to receive power transmitted from the drive engine to the blade shaft. Pulley diameter variations are carried out to determine the data on the pulley rotation, chopping time, and fuel consumption results. This study used a pulley with a diameter of 3 inches (76mm), 5 inches (127mm), dan 7 inches (178mm). The most optimal rotation is on the 3-inch diameter pulley with 3600 Rpm; the fastest chopping time is on the 3-inch pulley with a duration of 748 seconds; the pulley with the most chopped results is on a 3-inch pulley, which is 1.780 kg. And pulley with the least unshredded results is a 3-inch diameter pulley of 0.220 kg.
References
Arif Firdausi. 2013. Mekanika dan Elemen Mesin 1. Malang: Kementrian Pendidikan dan Kebudayaan
Amanov, A., Sembiring, J. P. B. A,. & Amanov, T. 2019. “Experimental Investigation On Friction And Wear Behavior Of The Vertical Spindle and V-Belt Of a Cotton Picker.” Journal Materials 12 (5): 773.
Chowdhuri, S., & Yedevalli, R. K. 2016. “Dynamics Of Belt – Pulley - Shaft System.” Journal Mechanism and Machine Theory 98: 199 – 215.
Dharma, P. A. W, Suwastika, A.A.N.G, sutari, Ni Wayan Sri. 2018. “Kajian Pemanfaatan Limbah Sabut Kelapa Menjadi Larutan Mikroorganisme lokal.” Ejournal Agroekoteknologi Tropika 7 (2): 200-210.
Dwi, Yuliana Maria. 2017. Optimalisasi Bahan Baku Kelapa. Jakarta : Warta Ekspor
Efrizal, E., & Sabar, M. 2020. “Analisa Perancangan Transmisi Sprocket And Chain Pada Kendaraan Prototype Bensin Kontes Mobil Hemat Energi (KMHE).” Motor Bakar: Jurnal Teknik Mesin 3(1).
Gao, P,. Xie, L., & Pan, J. 2019. “Reliability And Availability Models Of Belt Drive Systems Considering Failure Dependence.” Chinese Journal Of Mechanical Engineering 32 (1): 1 – 12.
Irfansyah, M, Zulkifli Lubis, Kamrul Oppusunggu, and Nurdiana. 2022. “Proses Pembuatan Mesin Pengiris Buah Pinang Model Pisau Rotari Kapasitas 25 Kg / Jam.” IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA) 1 (2): 65–73. https://doi.org/https://doi.org/10.56862/irajtma.v1i2.12.
Kristanto, P. 2004. Motor Bakar Torak, Yogyakarta : CV.Andi Offset
Muku, I. D. M. K., & Sukadana, I. G. K. 2009. “PengaruhRasio Kompresi Terhadap Unjuk Kerja mesin 4 langkah Menggunakan Arak Bali Sebagai Bahan Bakar.” Jurnal Ilmiah Teknik Mesin Cakra 3: 26-32.
Nababan, H. M, Ambarita, H., & Sitorus, T. B. 2013. “Studi Kinerja Mesin Otto Menggunakan Bahan Bakar Bensin dan etanol 96%.” Jurnal e-Dinamis 4 (4).
Nugraha, M. W., Santoso, D. T., & Naubnome, V. 2022. “Analisa Dan Perhitungan Belt Pada Huller Kopi.” Jurnal Media Bina Ilmiah 17 (1): 175-184.
Nurdiana, and Parlindungan Mahendra Saut Sagala. 2022. “Pembuatan Mesin Pencetak Adonan Kue Kacang Intip Modifikasi Model Roll Cutting Dengan Variasi Bentuk Hasil Cetakan Kapasitas 10 Kg/Jam.” IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA) 1 (1): 25–34. http://e-journals.irapublishing.com/index.php/IRAJTMA/article/view/5.
Paisal. Gunawan, Yuspian dan Samhuddin. 2018. “Analisa Perbedaan Ratio Sprocket Pada Sistem Transmisi Rantai.” Enyhalpy-Jurnal Ilmiah Mahasiswa Teknik Mesin 3 (4): 2502-894.
Pramono, Catur. 2021. Elemen Mesin. Magelang : Pustaka Rumah Cinta
Putra, R. C. 2018. “Perbandingan Unjuk Kerja dan Konsumsi Bahan Bakar Antara Motor Yang Mempergunakan Koil Standar Dan Busi Standar Dengan Motor Yang Mempergunakan Koil Racing Busi Racing Menggunakan Bahan Bakar Pertamax.” Motor Bakar : Jurnal Teknik Mesin.
Qurohman, M. T., Romadhon, S. A., & Usman, W. J. 2020. “Analisis Putaran Pulley Pada Mesin Penggiling Jagung.” Nozzle: Journal Mechanical Engineering 9 (2): 41-44.
Raharjo, WD dan Karnowo. 2008. Mesin Konversi Energy. Semarang : UNNES Press.
Shieh, C. J., & Chen W. H. 2002. “Effect Of Angular Speed on Behavior Of a V-Belt Drive System.” International Journal of Mechanical Sciences 44(9): 1879 – 1892.
Sularso, 1997. Dasar Perencanaan dan Pemilihan Elemen Mesin. Jakarta : PT. Pradnya Paramita
Trivana, L., &Pradhana, A. Y. 2017. “Optimalisasi Waktu Pengomposan dan Kualitas Pupuk Kandang Dari Kotoran Kambing dan Debu Sabut Kelapa Dengan Bioaktivator Promi dan Orgadec”. Jurnal Sain Veteriner 35 (1): 136 – 144.
Waryanti, A., Sudarno, S., & Sutrisno, E. 2013. “Studi Pengaruh Penambahan Sabut Kelapa Pada Pembuatan Pupuk Cair Dari Limbah Air Cucian Ikan Terhadap Kualitas Unsur Hara Makro (CNPK).” Jurnal Teknik Lingkungan 2(4): 1-7.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
