Studi Experimental Kinerja Mesin Pencacah Kertas Kapasitas 50 kg/Jam

Alfian Fauzi; Andriansyah  Sinaga; Yusuf  Fadhillah; Tino  Hermanto

doi:10.56862/irajtma.v3i2.126

Authors

Alfian Fauzi Universitas Medan Area
Andriansyah Sinaga Universitas Medan Area
Yusuf Fadhillah Universitas Medan Area
Tino Hermanto Universitas Medan Area https://orcid.org/0009-0005-5147-1739

DOI:

https://doi.org/10.56862/irajtma.v3i2.126

Keywords:

Shredding machines, Waste paper, Knife blades, Machine performance.

Abstract

The experimental study testing of the performance of a paper chopping machine with a capacity of 50 kg/hour in this research was motivated by the researcher's desire to test the performance of a paper chopper machine with a capacity of 50 kg/hour to find out the results of shredding paper and the capacity limits that can be used to chop paper based on the machine's capabilities. which will be built. This machine was built to reduce existing paper waste which will later be recycled into new paper products. The method used in this test is using an experimental method where the machine that will be used will chop each piece of paper with a shredded paper width of 10mm which will be inserted into the paper chopping machine. From the results obtained, the paper shredding machine was only able to produce 37.8% of the 50 kg/hour of shredded paper. The shredding results produced by the shredding machine did not contain any uncut defects or slanted cut defects produced by the paper shredding machine with a machine production capacity of only 19kg/hour. The maintenance used on paper shredding machines is preventive maintenance.

References

Anggraeni, Desi, Nuha, Alfan Ekajati Latief, Alvin Rhamdani, and Robby Rinaldi Sandi. 2021. "Modifikasi Mesin Pencacah Plastik PET Tipe Gunting Dengan Kapasitas 50 Kg/Jam."

Arfah, Mahrani. 2017. "Pemanfaatan Limbah Kertas Menjadi Kertas Daur Ualng Bernilai Tambah Oleh Mahasiswa." Buletin Utama Teknik 13 (1): 28–31.

Basori, Basori, Syafrizal, and Dwi Utomo Oktapriyana. 2014. "Redesain Mesin Pemotong Kertas Tipe Pemotongan Lurus Kapasitas 10 Kg/Jam." Jurnal Konversi Energi dan Manufaktur 1 (3): 125–32. https://doi.org/10.21009/jkem.1.3.2.

Castaneda, Alexandria, and John E. Kennedy III. 2021. "Food Waste Recycling in Upstate New York: A Qualitative Study Exploring the Feasibility of Feeding Food Scraps to Animals."

Fulha, Wildan Ainul, Muhammad Viktor Naubnome, Singaperbangsa Karawang Jl HSRonggo Waluyo, Kec Telukjambe Timur, Kabupaten Karawang, and Jawa Barat. 2021. "Performa Mesin Plastic Melter Kapasitas 15-20 Liter." Jurnal Rekayasa Mesin 16. https://jurnal.polines.ac.id/index.php/rekayasa.

Hakim, Moh Azizi, Fahmi Qudratullah, Erik Heriyana, Sony Sukmara, and Ari Eko. "Rancang Bangun Alat Pencacah Kertas (Dengan Kapasitas 4 Kilo Gram/Jam)." Vol. 2.

Hutasoit, Sandri C., Yoga Silalahi, Enzo W.B. Siahaan, and Kristian Tarigan. 2023. "Rancang Bangun Mesin Pencacah Sampah Organik Kapasitas 15 Kg/Jam." Jurnal Teknologi Mesin UDA 4 (1): 193. https://doi.org/10.46930/teknologimesin.v4i1.3306.

Ibrahim, Setiani, Megarini Hersaputri, and Vici Inouki Panjaitan. 2021. "Pembuatan Mata Pisau Mesin Pencacah Sampah Plastik Dengan Material AISI D2 Yang Dikeraskan." Jurnal Vokasi Teknologi Industri (JVTI) 3 (1): 1–5. https://doi.org/10.36870/jvti.v3i1.216.

Pane, Ali Hasimi, N. Saputra, dan Tengku Jukdin Saktisahdan. 2023. “Uji Kerja Mesin Pencacah Kulit Kelapa Berdasarkan Perbedaan Puli”. IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA) 2 (2):1-8. https://doi.org/10.56862/irajtma.v2i2.54.

Pranoto, Sigiet Haryo, Santi Yatnikasari, Muhammad Noor Asnan, and Rizqi Ilmal Yaqin. 2020. "Desain Dan Analisis Mata Pisau Pencacah Untuk Pengolahan Sampah Plastik Menggunakan Finite Element Analysis." Infotekmesin 11 (2): 147–52. https://doi.org/10.35970/infotekmesin.v11i2.260.

Rama, Hary Dwi, Idfi Berliansyah, Dandi Saputra Pratama, and Amril Reza. "Rancang Bangun Mesin Pencacah Kertas Kapasitas 50 Kg/Jam."

Ricky, Sapta M., and Nur Robbi. "Analisis Mata Pisau Pada Mesin Pencacah Kertas Tipe Pemotong Tegak Lurus Kapasitas 5 Kg/Jam."

Saparin, Saparin, Eka Sari Wijianti, and Budi Santoso Wibowo. 2022. "Mesin Pencacah Sampah Organik Tipe Piringan Dengan Kemiringan Sudut Hopper Input 60 Derajat." Machine: Jurnal Teknik Mesin 8 (2): 40–46. https://doi.org/10.33019/jm.v8i2.3415.

Saputra, Achmad Zaky, and Ah. Sulhan Fauzi. 2022. "Pengolahan Sampah Kertas Menjadi Bahan Baku Industri Kertas Bisa Mengurangi Sampah di Indonesia." Jurnal Mesin Nusantara 5 (1): 41–52. https://doi.org/10.29407/jmn.v5i1.17522.

Seprianto, Dicky, Moch Yunus, A. Zamheri, Dodi Endra, Moch. Yusuf, and Alief Burhanuddin Y.H. 2018. "Analisis Pemanfaatan Limbah Kertas Dan Kardus Untuk Penyerapan Sisa Fluida Cair Pada Industri (Studi Kasus Di PT. XYZ)." Jurnal Austenit 10 (2): 1–8.

Setiawan, Budi, and Fatkur Rhohman. "Rancang Bangun Alat Pencacah Sampah Kertas Dengan Ketebalan 5 Mm."

Sopyan, Dadan, and Dedi Suryadi. 2022. "Perancangan Mesin Pencacah Plastik Kapasitas 25 Kg." Jurnal Media Teknologi 6 (2): 213–22. https://doi.org/10.25157/jmt.v6i2.2796.

Sugandi, Wahyu Kristian, Asep Yusuf, Totok Herwanto, and Sidik Maulana. 2018. "Uji Kinerja Mesin Pencacah Plastik (Studi Kasus Bank Sampah Tasikmalaya (BST) Di Kecamatan Singaparna, Kabupaten Tasikmalaya)." Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering) 7 (3): 151. https://doi.org/10.23960/jtep-l.v7i3.151-159.

Syamsiro, Mochamad, et al. 2016. "Rancang Bangun Mesin Pencacah Plastik Sebagai Bahan Baku Mesin Pirolisis Skala Komunal." Jurnal Mekanika dan Sistem Termal (JMST) 1 (2): 43–48.

Triadi, Naufal Yudha, Budhi Martana, and Sigit Pradana. 2020. "Perancangan Mesin Pencacah Plastik Tipe Shredder Dan Alat Pemotong Tipe Reel." Jurnal Rekayasa Mesin 15 (2): 144. https://doi.org/10.32497/jrm.v15i2.1892.