Analisis Kinerja Mesin Pencacah Plastik Berbasis Pisau Berputar

Heri Prinando Nasution; Alfian Ramadhan; Tino  Hermanto; Iswandi Iswandi; Darianto Darianto

doi:10.56862/irajtma.v3i3.145

Authors

Heri Prinando Nasution Universitas Medan Area
Alfian Ramadhan Universitas Medan Area
Tino Hermanto Universitas Medan Area https://orcid.org/0009-0005-5147-1739
Iswandi Iswandi Universitas Medan Area https://orcid.org/0000-0003-0104-4470
Darianto Darianto Universitas Medan Area

DOI:

https://doi.org/10.56862/irajtma.v3i3.145

Keywords:

Plastic shredding machine, production capacity, HDPE, PP.

Abstract

Plastic waste is one of the most significant contributors to waste production in Indonesia, reaching 65.2 million tons per year. Efforts to reduce waste volume are carried out by shredding plastic into smaller sizes to facilitate recycling. This study aims to analyze the production capacity, quality, and efficiency of a rotating blade-based plastic shredding machine and to determine the necessary maintenance to sustain its long-term performance. The method employed is a quantitative approach, which involves recording and analyzing data from machine tests using 10 samples of HDPE and PP plastic. The results indicate that the machine's production capacity for HDPE plastic is 3.43 kg/min, while for PP plastic, it is 1.42 kg/min. The study concludes that the rotating blade-based plastic shredding machine is effective in processing plastic waste, with results varying based on the type of plastic material.

References

Anggraeni, N. D. 2019. "Analisa Kinerja Mesin Pencacah Botol Plastik Tipe Pet." Machine: Jurnal Teknik Mesin 5 (2): 31–35.

Anggraeni, N. D., A. E. Latief, A. Rhamdani, and R. R. Sandi. 2021. "Modifikasi Mesin Pencacah Plastik PET Tipe Gunting dengan Kapasitas 50 kg/jam." Jurnal Rekayasa Energi dan Mekanika 1 (2): 72.

Fauzi, Alfian, Andriansyah Sinaga, Yusuf Fadhillah, and Tino Hermanto. 2024. "Studi Experimental Kinerja Mesin Pencacah Kertas Kapasitas 50 kg/Jam." IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA) 3 (2): 54–61. https://doi.org/10.56862/irajtma.v3i2.126.

Maharja, R., Wira Lisrianti Latief, S. Novianti Bahar, H. Gani, and S. Fatimah Rahmansyah. 2022. "Pengenalan Pengolahan Sampah Berbasis 3R pada Masyarakat Pedesaan sebagai Upaya Pengurangan Timbulan Sampah Rumah Tangga."

Muhfidin, R., S. N. Sari, and R. Prastowo. 2024. "Analisis Kapasitas Mesin Pencacah Limbah Plastik dan Tekstil Menggunakan Unit Penghancur (Shredder)." G-Tech: Jurnal Teknologi Terapan 8 (3): 1474–1483.

Nasution, H. P. 2024. Analisis Kinerja Mesin Pencacah Plastik Berbasis Pisau Berputar dalam Proses Pengolahan Limbah Plastik. Tugas Akhir, Universitas Medan Area.

Nur, I., N. Nofriadi, and R. Rusmardi. 2014. "Pengembangan Mesin Pencacah Sampah/Limbah Plastik dengan Sistem Crusher dan Silinder Pemotong Tipe Reel." Prosiding Semnastek 1 (1).

Shofwan, U. K., J. Waluyo, and T. Hidayat. 2023. "Analisis Perancangan Mesin Pencacah Limbah Plastik Menggunakan Pisau Crusher dan Shredder." Jurnal Teknologi 16 (1): 28–36.

Sugandi, W. K. 2019. "Analisis Teknik Mesin Pencacah Plastik." Jurnal Agrotek Indonesia. https://doi.org/10.33661/jai.v4i1.1462.

Upingo, H., Y. Djamalu, S. Botutihe, and K. P. D. P. B. Bolango. 2016. "Optimalisasi Mesin Pencacah Plastik Otomatis." Jurnal Teknologi Pertanian Gorontalo 1 (2): 112–139.

Yaqin, R. I., B. H. Priyambodo, A. B. Prasetiyo, and M. L. Umar. 2021. "Penerapan Metode Elemen Hingga dalam Pemilihan Bahan pada Desain Pisau Mesin Pencacah Plastik." Scientific Journal of Mechanical Engineering Kinematika 6 (2): 85–98.