The Analysis of the Results of Forming Billiard's Wood Using a Lathe and Router Machine
DOI:
https://doi.org/10.56862/irajtma.v3i3.158Keywords:
Billiard stick, Woodturning, lathe, Dalbergia latifoliaAbstract
Making billiard sticks is a production process that requires high precision to produce quality products. This research aims to analyze the comparative performance of various cutting tools in the turning process for making billiard sticks. Proper cutting tools are essential in the pool cue manufacturing industry to achieve precise and quality results. This research uses two types of processes: the turning and the routing machine processes. The turning process is carried out on rosewood/snorkelling (Dalbergia latifolia) woodworkpieces, which will be used as billiard sticks. This research aims to evaluate dimensional accuracy and production process time. The turning process is carried out by varying the cutting speed parameters and feed depth. This research focuses on optimizing lathes' use to produce stick dimensions that comply with international standards. The study showed that turning tapered wood in a lathe to make billiard sticks took longer (376.2 seconds) than using a router machine (225.6 seconds).
References
Alfieri, David, and Uwe Sander. 2020. The Basics of Pool Billiards: Based on the Knowledge of Jerry Briesath, the Founder of The Pool School. Begin Playing the Sport of Pool Billiards Using the Teaching Methods of the Pool School. Germany: Litho.
Atikah, T. D., W. Wardani, and D. Surya. 2021. "Population, Economic Value and the Trade of Dalbergia Latifolia in Lombok, West Nusa Tenggara, Indonesia." IOP Conference Series Earth and Environmental Science 762 (1): 012015. https://doi.org/10.1088/1755-1315/762/1/012015.
Badan Standarisasi Nasional. 2013. Spesifikasi Desain untuk Konstruksi Kayu. Jakarta.
Clifford, Brian. 2008. Introduction to Woodturning.
Lubis, Muhammad Sobron Yamin, Abrar Riza, John Michel, dan Silvi Ariyanti. 2023. “Analisis Pertumbuhan Keausan Pahat Pada Pembubutan Material Mild Steel”. IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA) 2 (3):8-14. https://doi.org/10.56862/irajtma.v2i3.72.
Lubis, M. S. Y., D, S., Briantio, A., & Rosehan, R. (2023). Penentuan Parameter Pemotongan Optimal Proses Milling Terhadap Kekasaran Permukaan Baja SKD11 Dengan Metode Taguchi. IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA), 1(3), 44–50. https://doi.org/10.56862/irajtma.v1i3.33
Santoso, P. 2021. "Potensi kayu sonokeling (Dalbergia latifolia Roxb) dan jenis kayu lain di hutan rakyat Kecamatan Dlingo, Bantul Yogyakarta." Journal of Forest Science Avicennia 4 (1): 1–14.
Schey, John A. 2000. Introduction to Manufacturing Processes. Spain: McGraw-Hill.
Sharma, V. S., M. Dogra, and N. M. Suri. 2008. "Advances in the Turning Process for Productivity Improvement — A Review." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 222 (11): 1417–1442. https://doi.org/10.1243/09544054JEM1199.
The Brunswick-Balke-Collender Co. 1904. Modern Billiard: A Complete Text-Book of the Game. New York.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA)

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.