Process of Manufacturing Piston Displacer for Small Scale Gamma Type Stirling Engine
DOI:
https://doi.org/10.56862/irajtma.v4i1.176Abstract
This study aims to design and manufacture a displacer piston for a Gamma-type Stirling engine using steam pipe material due to its heat-resistant properties. The manufacturing process involved cutting, turning with a conventional lathe, and TIG welding. The final product dimensions were 65.75 mm in diameter, 60.20 mm in height, and 321.20 mm. Measurement results showed that the dimensional tolerances were within the design limits, and no leakage was found in the joints after visual inspection and basic functional testing. The study demonstrates that a simple process can produce a piston suitable for laboratory-scale applications.
References
Jufrizal, Z H Siregar, T J Saktisah, B K Putra, and M.N R Syahputra. "Uji Kinerja Burner Gas LPG Mesin Stirling dengan Variasi Laju Aliran Udara." IRA Jurnal Teknik Mesin dan Aplikasinya(IRAJTMA), 2022: 5-10.
Jufrizal, F H Napitulu, Ilmi Himsar Ambarita, and Mahadi Meliala. "Thermodynamic Analysis of a Gamma-Type Stirling Engine for m-CHP Application." In Proceeding of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE SEAM 2021), by Ibrahim A, 225–229. Melaka: Springer Nature Singapore, 2022b.
Jufrizal, Farel H Napitulu, Ilmi, Himsar Ambarita, and Mahadi Meliala. "Ideal Cycle Thermodynamic Analysis for Gamma-Type Stirling Engine." Journal of Mechanical Engineering and Technology (JMET), 2022a: 11–26.
Jufrizal, Farel Hasiholan Napitupulu, Ilmi, Himsar Ambarita, Supriatno, and Muhammad Irwanto. 2023. “Integration of a Gamma-Type Stirling Engine with LPG Cooking Stove for Micro-Scale Combined Heat and Power Generation.” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 108 (2): 1–16. https://doi.org/10.37934/arfmts.108.2.116.
Kurniawan, Eprian, Jufrizal, and Nurdiana. "Manufaktur Heater Menggunakan Bahan Pipa Steam untuk Mesin Stirling Tipe Gamma Skala Kecil." IRA Jurnal Teknik Mesin dan Aplikasinya(IRAJTMA), 2024: 23-30.
Lubis, Rahmadsyah, Jufrizal, Supriatno, and Nurdiana. "Analisis Efisiensi Thermal dan Konsumsi Bahan Bakar pada Burner Kompor SNI Sebagai Dasar Acuan Perencanaan Burner Mesin Stirling." IRA Jurnal Teknik Mesin dan Aplikasinya(IRAJTMA), 2024: 1-7.
Mawardi, Jufrizal, and M Hdayah. "Uji Kinerga Burner LPG Mesin Stirling Dengan Variasi KosumsI Bahan Bakar." IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA), 2022.
Prasetio, Indra, Jufrizal, and Supriatno. "Pengujian Kinerja Cooling Water untuk Mesin Stirling tipe Gamma Skala Kecil." IRA Jurnal Teknik Mesin dan Aplikasinya(IRAJTMA) Vol. 3 (2024): 10-16.
Widodo. "Studi Eksperimen Output Daya Pada Motor Stirling TD 295 Tipe Gamma Dengan Menggunakan Stirling Engine Control." polibatam, 2013: 1-7.
Zakaria, Roni, Ilham Priadythama, and Nugroho Eka Budiyanto. "Rancangan Mesin Stirling Memanfaatkan Komponen Mesin Lain Yang Ada Di Pasaran Indonesia Sebagai Pembangkit Listrik." Performa, 2013: 51-56.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA)

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.