Strength Analysis of Tig Welding Joints on KMHE Car Roll Bars Using 6061 Aluminum Through Bending Tests
DOI:
https://doi.org/10.56862/irajtma.v4i1.203Keywords:
Tungsten welding inert gas, aluminum 6061, current variation, three-point bending test.Abstract
The welding process is a production process that aims to combine two types of materials into a usable component. In the manufacturing industry, the Tungsten Inert Gas welding process is widely used in industrial processes requiring high accuracy, good welding quality, and welding results. This study compares the strength of welded joints by varying the welding current. This research uses 6061 aluminum material to determine the strength of Tungsten Inert Gas welding joints. The study focused on the strength of Tungsten Inert Gas welding joints with current variations of 140 A, 160 A, and 180 A using a testing method using a three-point bending test to determine the right current variation in the Tungsten Inert Gas welding process. This study found that the current variation of 160 A with a strength of 203.7 N/mm2 is better than 140 A, 139.9 N/mm2, and 180A, 192.1 N/mm2 in Tungsten Inert Gas welding joints.
References
Art 277, Appendix J. 2013. “Article 277 Règlement Technique Formule Libre Free Formula Technical Regulations (Groupe E / Group E).” 1–10.
Budi, Sigit Setijo, Andre Budhi Hendrawan, and Muhammad Khumaidi Usman. 2024. “Desain Lower Arm Model Double Wishbone Mobil Listrik PHB Menggunakan Finite Element Metode.” IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA) 3 (3): 73–78. https://doi.org/10.56862/irajtma.v3i3.139.
Buntu Lobo, Osmar, Taufik Keledar, Samlan Keliolan, and Irfan Difinubun. 2024. “Variasi Putaran Spindel Mesin Bubut 1000A Mempengaruhi Hasil Uji Tarik dan Waktu Pengelasan pada Las Gesek.” IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA) 3 (2): 62–68. https://doi.org/10.56862/irajtma.v3i2.108.
Iii, Senastitan, Arnold Kuch, and Yeremia Jalmaf. 2023. “Analisis Pengaruh Variasi Besar Arus dan Kecepatan Pengelasan terhadap Pengujian Tekuk / Bending dan Struktur Makro pada Material Aluminium 6061 dengan Proses Pengelasan TIG (GTAW).” Senastitan, no. Senastitan III: 1–10.
Kelkar, Sachin Sunil, Puneet Gautam, Shubham Sahai, Prajwal Sanjay Agrawal, and R. Manoharan. 2021. “A Detailed Study on Design, Fabrication, Analysis, and Testing of the Anti-Roll Bar System for Formula Student Cars.” SN Applied Sciences 3 (3): 1–14. https://doi.org/10.1007/s42452-021-04279-z.
Kemendikbudristek. 2024. “Pedoman Kontes Mobil Hemat Energi (KMHE) Perguruan Tinggi 2024.”
Kesuma, Poppy, Steven Darmawan, and Agus Halim. 2020. “Aerodynamics Analysis of Mobil Irit Tarumanagara Using CFD Method.” IOP Conference Series: Materials Science and Engineering 1007 (1). https://doi.org/10.1088/1757-899X/1007/1/012032.
Lubis, Sobron Yamin, Sofyan Djamil, Rosehan Rosehan, Harley Anugrah, and Kevin Raynaldo. 2022. “Analisis Kekuatan Tarik Sambungan Plat Aluminium AA 5083 pada Proses Spot Welding.” Jurnal Muara Sains, Teknologi, Kedokteran dan Ilmu Kesehatan 6 (2): 241–48. https://doi.org/10.24912/jmstkik.v6i2.13298.
Mulyadi, M. 2022. “Analisa Sifat Mekanis Komposit Epoksi/Partikel Silika dari Ekstraksi Sekam Padi: Bagian II: Pemodelan.” IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA) 1 (1): 75–80. https://doi.org/10.56862/irajtma.v1i1.13.
Pasaribu, Muhammad Nuh Hudawi, Eswanto Eswanto, and Muchsin Harahap. 2024. “Pelatihan Keterampilan Pengelasan Las Listrik Busur Manual bagi Masyarakat di Desa Bandar Bayu, Serdang Bedagai-Sumatera Utara.” IRA Jurnal Pengabdian Kepada Masyarakat (IRAJPKM) 2 (1): 7–12. https://doi.org/10.56862/irajpkm.v2i1.104.
Pradeep Dev, G., P. Sam Livingston, M. Shunmuganathan, R. Surendar, A. Siva Subramanian, A. Simon Christopher, and K. C. Ganesh. 2016. “Analysis of 6061 Aluminium Alloy Sheet Metal Bending Process for Various Thickness Using Finite Element Modelling.” International Journal of Theoretical and Applied Mathematics 2 (2): 93–99. https://doi.org/10.11648/j.ijtam.20160202.20.
Putra, Wijaya. 2009. Buku Ajar Proses Manufaktur. Surabaya: Universitas Wijaya Putra.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
