Analysis of Palm Caul, Bark and Palm Sheel Fuel Use in Multi-Fuel Boiler Systems at PT. Toba Pulp Lestari, Tbk Porsea

Authors

  • Juanda Herlambang Marpaung Politeknik Teknologi Kimia Industri Medan
  • Nurlianna Tarigan Politeknik Teknologi Kimia Industri Medan

DOI:

https://doi.org/10.56862/irajtma.v2i3.67

Keywords:

Boiler, Fuel, Palm sheel, Steam

Abstract

This research aims to calculate the amount of fuel in the multi-fuel boiler unit at PT Toba Pulp Lestari, Tbk. A boiler is a closed steam boiler, and the heat of combustion is transmitted to the water until it becomes hot steaming water or steam. In the work process, it is necessary to calculate the total fired and moisture to determine the efficient level of maturity for each unit. In this research, the author found that the energy needed to evaporate water in fuel up to 0% was Palm Caul 2303.67 kcal/kg, Palm Shell 3833.25 kcal/kg, and Bark 1513.69 kcal/kg. The energy used in the Multi Fuel Boiler requires Palm Caul 186,688.4 kg/hour, Palm sheel 97,683.6 kg/hour, and Bark 181,508.9 kg/hour.

References

Abdullah, I., Shamsuddin, A. H., & Sopian, K. 2000. Combustion of palm oil solid waste in fluidized bed combustor.

Abdullah, I., Manik, Y. N., Barita, B., Jufrizal, J., Supriatno, S., & Eswanto, E. 2019. Desain Insinerator Menggunakan Bahan Bakar Cangkang Kelapa Sawit. Jurnal Rekayasa Material, Manufaktur dan Energi, 2(1), 34-43.

Alief Akhman, 2020. Sistem Udara dan Gas. Bandung, Rhakman Elektrical Engineneering.

Avif Qoniah, 2015. Sistem Pembangkit Uap. Semarang, Aero Engineering indonesia.

Caesarvery, 2015. Prinsip Kerja Mechanical Deaerator pada Gas Terlarut di PLTU. Sains Teknologi dan Ekonomi Bisnis.

Caesar Wiratama, 2021. Penggunaan Ketel Uap (Boiler) dalam Industri. Aero Engineering, Jakarta Indonesia.

Djokosetyardjo, M. J. 1987. Ketel Uap. Jakarta: Pradnya Paramita

Dzikrienyansyah M, Imron. 2016 .“ Pengoperasian Alat- alat pada Boiler” Jakarta, Dzikrie Eengginers.

Frickle, Thomas B. (2009). Buku Panduan Pabrik Kelapa Sawit Skala Kecil Untuk Produksi Bahan Baku Bahan Bakar Nabati (BNN)”. Environmental Services Program. USAID Indonesia.

Hakim Tofan, 2010. Boiler Feed Water System. Jakarta : Power Plant Tecnology Indonesia.

Hasibuan, Joel Davidson, dan Jufrizal Jufrizal. 2023. “Pemodelan Numerik Perpindahan Panas Pada Dinding Ruang Bakar Boiler Menggunakan Software Engineering”. IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA) 2 (2):81-90. https://doi.org/10.56862/irajtma.v2i2.47.

Lutfi , Muhammad, and Nurlianna Tarigan. 2023. “Analysis of Chain Stress on Bucket Elevators Indarung IV Raw Mill Unit at PT Semen Padang”. IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA) 2 (1):43-50. https://doi.org/10.56862/irajtma.v2i1.44.

MJ Djokosetyardjo, ketel uap (ed. 5), pradnya paramita, 2003

Muin A. Syamsir.1988. “ pesawat konversi energi I (Ketel Uap)”. Edisi Pertama. Penerbit CV. Rajawali. Jakarta.

Simanjuntak, E. 2023. Analisis Performa Boiler Berbahan Bakar Kombinasi Fiber Dan Cangkang Pada Boiler Takuma N-600 SA.

Suprianto. 2015. “Pengertian Boiler (Ketel Uap)”. Elektronika Industri. Semarang

Tufiq Ginanjar. 2011. Analisa Efesiensi Water Tube Boiler Berbahan Bakar Fiber, Cangkang, dan kulit kayu menggunakan Metode Langsung, Departemen Teknik Mesin , Jakarta Indonesia.

Downloads

Published

2023-12-11

How to Cite

Marpaung, J. H. ., & Tarigan, N. (2023). Analysis of Palm Caul, Bark and Palm Sheel Fuel Use in Multi-Fuel Boiler Systems at PT. Toba Pulp Lestari, Tbk Porsea. IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA), 2(3), 1–7. https://doi.org/10.56862/irajtma.v2i3.67

Issue

Vol. 2 No. 3 (2023): December

Section

Scientific Article

License

Copyright (c) 2023 IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA)

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.