Design and Build a Mini Portable Power Spayer Steam Jet Machine

Authors

  • Amin Nur Akhmadi Politeknik Harapan Bersama
  • Faqih Fatkhurrozak Politeknik Harapan Bersama
  • Firman Lukman Sanjaya Politeknik Harapan Bersama

DOI:

https://doi.org/10.56862/irajtma.v3i1.95

Keywords:

Design, mini steam, flow meter, pump, power sprayer.

Abstract

This research discusses the mini portable power spayer steam jet machine by testing it with a flow meter to find out the specifications. This machine is designed to be easily moved from one place to another. This machine has a pump that can create high water pressure. This steam jet machine can be operated using a DC motor. This machine is usually built with materials that are resistant to corrosion and durable for long-term use. To create a mini portable power spayer steam jet machine that has a simple, cheap, easy to operate and maintain system, this machine must be designed so that easy to move from one place to another, both indoors and outdoors, must be able to produce water vapor at a high enough pressure to clean dirt, the design must consider safety aspects to protect users from injury or potential danger, by designing the machine mini portable power spayer pump with dimensions that match those on the market, realized with real and existing designs and products, by testing with a flow meter, the test was carried out with a spray result of 6 liters/minute according to specifications. Making a design for a mini portable power spayer steam engine pump with an inventor that is realized is the same as choosing a product on the market. The process of testing the mini portable power spayer steam machine with a flow meter measuring tool produces a water jet pressure of 6 liters/minute, when tested with a flow meter spayer gun in a straight water jet pressure position.

References

Astriyanto, Maskuh, Wijianto, and Subroto. 2012. "Aplikasi Respon Getar untuk Fenomena Kavitasi pada Pompa Sentrifugal dengan Variasi Kerusakan Impeler." Jurusan Teknik Mesin, Fakultas Teknik, Universitas Muhammadiyah Surakarta.

Anta, Felly. 2013. "Deteksi Kavitasi Pompa Sentrifugal dengan Analisis Sinyal Getaran." Jurusan Teknik Mesin, Fakultas Teknik, Universitas Diponegoro.

Susilo, Djoko, and Didik. 2009. "Pemantauan Kondisi Mesin Berdasarkan Sinyal Getaran." Mekanika 8 (1).

Church, Austin H., and Zulkifli Harahap. 1993. Pompa dan Blower Sentrifugal. 3rd ed. Jakarta: Penerbit Erlangga.

Dietzel, Fritz, and Dakso Sriyino. 1993. Turbin, Pompa, dan Kompresor. Jakarta: Penerbit Erlangga.

Delly, Jenny. 2009. "Pengaruh Temperatur Terhadap Terjadinya Kavitasi pada Sudu Pompa Sentrifugal." Jurusan Teknik Mesin, Fakultas Teknik, Universitas Haluoleo, Kendari. Vol. 1, No. 1.

Kristanto, Hendra, Djoko Wahyudi, and M Fathuddin Noor. 2014. "Analisa Kegagalan Mechanical Seal Booster Pump dan Bearing Temperature High pada BFP PLTU Paiton Unit 9." Probolinggo: Jl. Yos Sudarso 107 Pabean Dringu 67271.

Indarto. 1999. "Perancangan Casing Pompa Sentrifugal." Perpustakaan Fakultas Teknik UGM, Yogyakarta.

Karassik, Igor J., et al. 2011. Pump Handbook. New York: McGraw-Hill Book Company, Inc.

Lazarkiewics, Adam Troskolanski. 2000. Impeller Pumps. New York: Pergamon Press, Inc.

Haris, Nubly M., Yudo Hartono, and Kriyanto. 2017. "Analisa Kekuatan Coupling pada Kapal Inspeksi Perikanan SKIPI Kelas ORCA Menggunakan Metode Elemen Hingga." Universitas Diponegoro, Semarang.

Rusli, M., Agus A., Lovely S., and Mulyani B. 2015. "Kaji Banding Prediksi Kerusakan pada Bantalan Gelinding Melalui Sinyal Getaran dan Sinyal Suara." Jurnal Penelitian Proceeding Seminar Nasional Tahunan Teknik Mesin XIV (SNTTM XIV), Jurusan Teknik Mesin, Fakultas Teknik, Universitas Andalas.

Rohman, Erik Wahkidur. 2015. "Uji Eksperimen Pengaruh Jumlah Sudu Torque Flow Impeller Terhadap Kinerja Pompa Sentrifugal." Jurusan Teknik Mesin, Fakultas Teknik, Universitas Negeri Surabaya. Vol. 3, No. 3: 145-152.

Sularso, and Haruo Tahara. 2003. Pompa dan Kompresor: Pemilihan, Pemakaian dan Pemeliharaan. 1st ed. Jakarta: P.T Pradnya Paramita.

Sularso, and Kiyokatsu Suga. 2007. Dasar Perencanaan dan Pemilian Elemen Mesin. 9th ed. Jakarta: P.T Pradnya Paramita.

Published

2024-04-30

How to Cite

Akhmadi, A. N., Fatkhurrozak, F. ., & Sanjaya, F. L. . (2024). Design and Build a Mini Portable Power Spayer Steam Jet Machine. IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA), 3(1), 1–10. https://doi.org/10.56862/irajtma.v3i1.95

Issue

Section

Scientific Article