Analysis of the Characteristics of AISI 8620 Camshaft Material and Grey Cast Iron Using Metallographic and Optical Spectrometry Methods
DOI:
https://doi.org/10.56862/irajtma.v4i2.261Keywords:
Camshaft, AISI 8620, Grey cast iron, Metallography, Optical Spectrometry.Abstract
The demand for non-OEM camshafts is increasing, but this raises concerns about material quality. This study analyses the material characteristics of AISI 8620 and grey cast iron camshafts used in 125cc automatic motorcycles. Testing was conducted using Metallography and Optical Emission Spectrometry. AISI 8620 exhibits a fine ferrite-pearlite microstructure and alloying elements such as chromium and molybdenum, which support heat treatment. Cast iron exhibits a pearlite structure with flake graphite, providing superior damping but less toughness. The results indicate that AISI 8620 is more suitable for high-load applications, while cast iron is suitable for lightweight and cost-effective applications. This study provides important insights into material selection for motorcycle camshaft manufacturing.
References
Cahyono, Aries Dwi, Anggit Bayu Prabowo, Aan Burhanudin, dan Hisyam Ma’mun. 2022. “Analisa Keausan Besi Cor Kelabu dan Alumunium Al₂O₃ dengan Pelumas SAE 40 Menggunakan Alat Uji Tribology Pin on Disc.” Quantum Teknika: Jurnal Teknik Mesin Terapan. https://doi.org/10.18196/jqt.v3i2.14175.
Cerit, Alper A., Fehmi Nair, Hafız M. N. Zafar, dan M. B. Karamış. 2023. “Comparison of the Surface Morphologies of Ceramic Reinforced Metal Matrix Composite Cams after Wear Tests under Dry and Wet Conditions.” Journal of Composite Materials 57 (9): 1541–56. https://doi.org/10.1177/00219983231159720.
Chen, Jianbin, Zhidong Zuo, Songze Zhou, Xiaofeng Wang, Yonglong Chen, dan Guoping Ling. 2021. “Study on the Compressive Stress Retention in Quenched Cam of 100Cr6 Steel Based on Coupled Thermomechanical and Metallurgical Modeling.” Materials 14 (20). https://doi.org/10.3390/ma14205912.
Fadilah, Rizki. 2020. “Analisis Kekuatan Tarik dan Struktur Mikro Material Komposit pada Body Mobil Listrik Prosoe KMHE 2019.” Jurnal Teknik Mesin 9 (1): 129. https://doi.org/10.22441/jtm.v9i2.6199.
García, Eduardo Colin, Alejandro Cruz Ramírez, Guillermo Reyes Castellanos, Jaime Téllez Ramírez, dan Antonio Magaña Hernández. 2021. “Microstructural and Mechanical Assessment of Camshafts Produced by Ductile Cast Iron Low Alloyed with Vanadium.” Metals 11 (1): 1–18. https://doi.org/10.3390/met11010146.
Rahman, Abdul, Syarifah Akmal, Ranu Firmansyah, Abdul Ali Chaniago, dan Jurusan Teknik Mesin. 2023. “Perancangan Mesin Modifikasi Camshaft Tipe Single Cutter Menggunakan Autodesk Inventor.” Jurnal Teknologi Universitas Muhammadiyah Jakarta 15 (2): 299–300. https://dx.doi.org/10.24853/jurtek.15.2.299-304.
Rahmandhika, Andinusa, Etantyo Daffa Defantyan, dan Vicky Thorikhotul Lutfi. 2024. “J-Proteksion: Jurnal Kajian Ilmiah dan Teknologi Teknik Mesin.” J-Proteksion 4 (13): 1–6. https://doi.org/10.32528/jp.v9i2.3049.
Saputra, Agus Riyani Doni, Gugun Gundara, Dimas Fandi Pratama, dan Rachman Firman Fauzi. 2025. “Pengaruh Jenis Scrap Besi sebagai Bahan Utama Pengecoran Logam terhadap Komposisi dan Kekerasan Besi Cor.” Journal of Energy, Materials, & Manufacturing Technology (JEMMTEC), no. 1: 30–35.
Sumpena, Sumpena, Hb. Sukarjo, Wardoyo Wardoyo, dan Soksono Singgih Pramana. 2021. “Analisa Kekerasan dan Keausan Cylinder Sleeve dari Besi Cor Kelabu FC250 Hasil Sand Mold Casting.” Jurnal Engine: Energi, Manufaktur, dan Material 5 (2): 97. https://doi.org/10.30588/jeemm.v5i2.944.
Widitya, Rahya Arief, Fachrizal Satrio Putro Yuwono, dan Mohamad Zein Saleh. 2024. “Strategi Pemasaran Mobil Konvensional dan Mobil Listrik di Pasar Indonesia.” Trending: Jurnal Ekonomi, Akutansi dan Manajemen 2 (1): 37–54.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
