Rancang Bangun Sistem Kontrol Otomatis Berbasis Panel Surya pada Mesin Spinner Oil
DOI:
https://doi.org/10.56862/irajtma.v4i2.231Kata Kunci:
Kontrol otomatis, Solar Panel, Mesin Spiner Oil, Perancangan Sistem PengendalianAbstrak
Peningkatan efisiensi dan keberlanjutan proses industri menjadi fokus utama dalam pengembangan teknologi modern. Penelitian ini bertujuan merancang sistem kontrol otomatis pada mesin spinner oil menggunakan energi terbarukan dari panel surya. Sistem ini ditujukan untuk meningkatkan efisiensi operasional, mengurangi ketergantungan pada energi konvensional, dan mendukung inisiatif ramah lingkungan. Sistem dikembangkan dengan integrasi sensor untuk memantau kondisi mesin seperti kecepatan dan tingkat bahan baku, serta dikendalikan oleh mikrokontroler yang terhubung ke panel surya. Metode penelitian mencakup perancangan, pemrograman mikrokontroler, instalasi panel surya, dan pengujian sistem. Hasil menunjukkan sistem berhasil meningkatkan efisiensi mesin, mengurangi konsumsi energi non-terbarukan, serta menurunkan emisi karbon. Penelitian ini berkontribusi pada pengembangan sistem kontrol otomatis berbasis energi terbarukan dan berpotensi diterapkan pada proses industri lainnya yang memerlukan solusi efisien dan ramah lingkungan.
Referensi
Ajiga, D., P. A. Okeleke, S. O. Folorunsho, and C. Ezeigweneme. 2024. “The Role of Software Automation in Improving Industrial Operations and Efficiency.” Accessed August 2024. https://doi.org/10.53430/ijeru.2024.7.1.0031.
Balat, M. 2005. “Usage of Energy Sources and Environmental Problems.” Energy Exploration & Exploitation 23 (2): 141–168. https://doi.org/10.1260/0144598054530011.
Fadhilah, N. N., L. Safitri, U. A. Alfian, N. D. Dharmawati, and R. A. Renjani. 2024. “Minimize Oil Losses in Palm Oil Mill through Optimalization of Sludge Separator Performance.” Jurnal Teknik Pertanian Lampung 13 (1): 123–131. https://doi.org/10.23960/jtep-l.v13i1.123-131.
Facilities, I. 2002. “Industrial Facilities.” Earthquake Spectra 18 (SUPPL. A): 257. https://doi.org/10.1193/1.2803914.
Ghobakhloo, M., and M. Fathi. 2021. “Industry 4.0 and Opportunities for Energy Sustainability.” Journal of Cleaner Production 295: 126427. https://doi.org/10.1016/j.jclepro.2021.126427.
Harianto, B., and M. Karjadi. 2022. “Planning of Photovoltaic (PV) Type Solar Power Plant as an Alternative Energy of the Future in Indonesia.” ENDLESS International Journal of Future Studies 5 (2): 182–195. https://doi.org/10.54783/endlessjournal.v5i2.87.
Ma, X., M. Zhang, F. Yang, Y. Xue, R. Gu, and N. Guo. 2023. “Analysis of Circulation Characteristics and Heat Balance of High-Speed Rolling Bearing under Oil-Air Lubrication.” Lubricants 11 (3): 1–14. https://doi.org/10.3390/lubricants11030136.
Márquez-Vera, M. A., M. Martínez-Quezada, R. Calderón-Suárez, A. Rodríguez, and R. M. Ortega-Mendoza. 2023. “Microcontrollers Programming for Control and Automation in Undergraduate Biotechnology Engineering Education.” Digital Chemical Engineering 9: 100122. https://doi.org/10.1016/j.dche.2023.100122.
Rahman, A., O. Farrok, and M. M. Haque. 2022. “Environmental Impact of Renewable Energy Source Based Electrical Power Plants: Solar, Wind, Hydroelectric, Biomass, Geothermal, Tidal, Ocean, and Osmotic.” Renewable and Sustainable Energy Reviews 161: 112279. https://doi.org/10.1016/j.rser.2022.112279.
Sahoo, S., and C.-Y. Lo. 2022. “Smart Manufacturing Powered by Recent Technological Advancements: A Review.” Journal of Manufacturing Systems 64: 236–250. https://doi.org/10.1016/j.jmsy.2022.06.008.
Sharif, A., M. S. Meo, M. A. F. Chowdhury, and K. Sohag. 2021. “Role of Solar Energy in Reducing Ecological Footprints: An Empirical Analysis.” Journal of Cleaner Production 292: 126028. https://doi.org/10.1016/j.jclepro.2021.126028.
Shafiullah, M., S. D. Ahmed, and F. A. Al-Sulaiman. 2022. “Grid Integration Challenges and Solution Strategies for Solar PV Systems: A Review.” IEEE Access 10 (May): 52233–52257. https://doi.org/10.1109/ACCESS.2022.3174555.
Siregar, Muhammad Fadlan, Habib Satria, Tomi Abdillah, et al. 2023. “Simulation of Passive Filter Harmonic Reduction and Power Factor Improvement for Non-Linear Loads IEC 61000-3-2 Standard.” 1st International Conference on Science and Technology UISU (ICST). https://doi.org/10.30743/039fsy72.
Sugandi, W. K., A. M. Kramadibrata, F. Fetriyuna, and Y. Prabowo. 2018. “Analisis Teknik dan Uji Kinerja Mesin Peniris Minyak (Spinner) (Technical Analysis and Test Performance of Oil Spinner Machine).” Jurnal Ilmiah Rekayasa Pertanian dan Biosistem 6 (1): 17–26. https://doi.org/10.29303/jrpb.v6i1.65.
Tawalbeh, M., A. Al-Othman, F. Kafiah, E. Abdelsalam, F. Almomani, and M. Alkasrawi. 2021. “Environmental Impacts of Solar Photovoltaic Systems: A Critical Review of Recent Progress and Future Outlook.” Science of the Total Environment 759: 143528. https://doi.org/10.1016/j.scitotenv.2020.143528.
Ukoba, K., K. O. Yoro, O. Eterigho-Ikelegbe, C. Ibegbulam, and T.-C. Jen. 2024. “Adaptation of Solar Energy in the Global South: Prospects, Challenges and Opportunities.” Heliyon 10 (7): e28009. https://doi.org/10.1016/j.heliyon.2024.e28009.
Zhang, M., X. Xing, and W. Wang. 2024. “Smart Sensor-Based Monitoring Technology for Machinery Fault Detection.” Sensors 24 (8). https://doi.org/10.3390/s24082470.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2025 IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA)
Artikel ini berlisensiCreative Commons Attribution-ShareAlike 4.0 International License.
