Perancangan Mesin Pencacah Polimer Komposit Kapasitas 10 kg/Jam
DOI:
https://doi.org/10.56862/irajtma.v4i2.283Kata Kunci:
Mesin pencacah, Polimer, Perancangan, Kapasitas 10 kg/jam.Abstrak
Peningkatan volume limbah plastik komposit menimbulkan tantangan serius bagi lingkungan sehingga diperlukan solusi pengolahan yang efektif dan berkelanjutan. Penelitian ini bertujuan merancang mesin pencacah plastik komposit berkapasitas 10 kg/jam yang sesuai untuk industri kecil maupun rumah tangga. Metode perancangan dilakukan melalui pendekatan kuantitatif dengan analisis rangka, sistem transmisi sabuk V, dan pemilihan pisau baja karbon. Hasil menunjukkan mesin mampu mencapai kapasitas target dengan konsumsi energi rendah dan stabilitas struktural baik. Kesimpulan penelitian menegaskan bahwa mesin ini berpotensi menjadi solusi tepat guna dalam mendukung program daur ulang plastik berkelanjutan pada skala lokal.
Referensi
Al-Salem, S.M., Lettieri, P., Baeyens, J., 2009. “Recycling and recovery routes of plastic solid waste (PSW): A review”. Waste Management 29, 2625–2643. https://doi.org/10.1016/j.wasman.2009.06.004.
Geyer, R., Jambeck, J.R., Law, K.L., 2017. “Production, use, and fate of all plastics ever made”. Sci Adv 3. https://doi.org/10.1126/sciadv.1700782.
Dwy, S., Hermanto, T., Iswandi, I., Darianto, D., 2025. “Analisis Kinerja Mesin Peniris Bawang Untuk Industri Makanan Skala Kecil”. IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA) 4, 59–68. https://doi.org/10.56862/irajtma.v4i1.199.
Fauzi, Rizky, Iswandi Iswandi, and Tino Hermanto. 2025. “Development of An Electric-Powered Oil Palm Harvesting Tool Prototype to Improve Productivity”. IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA) 4 (1):76-86. https://doi.org/10.56862/irajtma.v4i1.179.
Grigore, M., 2017. “Methods of Recycling, Properties and Applications of Recycled Thermoplastic Polymers”. Recycling 2, 24. https://doi.org/10.3390/recycling2040024.
Hossack, B.R., Puglis, H.J., Battaglin, W.A., Anderson, C.W., Honeycutt, R.K., Smalling, K.L., 2017. “Widespread legacy brine contamination from oil production reduces survival of chorus frog larvae”. Environmental Pollution 231, 742–751. https://doi.org/10.1016/j.envpol.2017.08.070.
Jambeck, J.R., Geyer, R., Wilcox, C., Siegler, T.R., Perryman, M., Andrady, A., Narayan, R., Law, K.L., 2015. “Plastic waste inputs from land into the ocean”. Science (1979) 347, 768–771. https://doi.org/10.1126/science.1260352.
Lebreton, L., Andrady, A., 2019. “Future scenarios of global plastic waste generation and disposal”. Palgrave Commun 5, 6. https://doi.org/10.1057/s41599-018-0212-7.
Olodu, D.D., Aluya, F.O., Walters, S., Falobi, B.A., 2025a. “Design and Fabrication of a Locally Made Plastic Shredder”. ABUAD Journal of Engineering Research and Development (AJERD) 8, 226–239. https://doi.org/10.53982/ajerd.2025.0801.24-j.
Ragaert, K., Delva, L., Van Geem, K., 2017. “Mechanical and chemical recycling of solid plastic waste”. Waste Management 69, 24–58. https://doi.org/10.1016/j.wasman.2017.07.044.
Reddy, S., Raju, T., 2018. “Design and Development of mini plastic shredder machine”. IOP Conf Ser Mater Sci Eng 455, 012119. https://doi.org/10.1088/1757-899X/455/1/012119.
Singh, S., Dwivedi, S.P., Kumar, A., Anand, V., Vikram Singh, V., Tauqueer Ansari, Md., 2021. “A critical review on the utilization of waste PET and marble dust in the development of composite material”. Mater Today Proc 47, 4034–4040. https://doi.org/10.1016/j.matpr.2021.04.535.
Tsuchimoto, I., Kajikawa, Y., 2022. “Recycling of Plastic Waste: A Systematic Review Using Bibliometric Analysis”. Sustainability 14, 16340. https://doi.org/10.3390/su142416340.
Uzosike, C.C., Yee, L.H., Padilla, R.V., 2023. “Small-Scale Mechanical Recycling of Solid Thermoplastic Wastes: A Review of PET, PEs, and PP”. Energies (Basel) 16, 1406. https://doi.org/10.3390/en16031406.
Wong, J.H., Gan, M.J.H., Chua, B.L., Gakim, M., Siambun, N.J., 2022a. “Shredder machine for plastic recycling: A review paper”. IOP Conf Ser Mater Sci Eng 1217, 012007. https://doi.org/10.1088/1757-899X/1217/1/012007.
Wong, J.H., Gan, M.J.H., Chua, B.L., Gakim, M., Siambun, N.J., 2022b. “Shredder machine for plastic recycling: A review paper”. IOP Conf Ser Mater Sci Eng 1217, 012007. https://doi.org/10.1088/1757-899X/1217/1/012007.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2025 IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA)
Artikel ini berlisensiCreative Commons Attribution-ShareAlike 4.0 International License.
