Proses Pembuatan Mesin Pencacah Polimer Komposit Kapasitas 10 kg/Jam

Penulis

DOI:

https://doi.org/10.56862/irajtma.v4i2.284

Kata Kunci:

Mesin pencacah polimer, Daur ulang limbah, Desain mesin, Teknologi tepat guna.

Abstrak

Permasalahan limbah plastik terus meningkat dan memerlukan solusi teknis yang efektif melalui proses daur ulang. Salah satu tahap krusial adalah pencacahan, yang bertujuan memperkecil ukuran material agar mudah diproses kembali. Penelitian ini merancang dan membuat mesin pencacah plastik dan polimer komposit berkapasitas 10 kg/jam dengan konstruksi sederhana, hemat energi, dan sesuai untuk skala rumah tangga maupun industri kecil. Proses perancangan mencakup analisis kebutuhan daya, desain rangka, pemilihan pisau, serta sistem transmisi. Hasil pengujian menunjukkan mesin mampu menghasilkan cacahan plastik berukuran rata-rata 5 mm dengan kinerja mendekati kapasitas target. Mesin ini berpotensi meningkatkan pengolahan limbah plastik secara lokal.

Referensi

Dwy, S., Hermanto, T., Iswandi, I., Darianto, D., 2025. “Analisis Kinerja Mesin Peniris Bawang Untuk Industri Makanan Skala Kecil”. IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA) 4, 59–68. https://doi.org/10.56862/irajtma.v4i1.199.

Fauzi, R., Iswandi, I., Hermanto, T., 2025. “Pengembangan Prototipe Alat Panen Sawit Bertenaga Listrik untuk Meningkatkan Produktivitas”. IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA) 4, 76–86. https://doi.org/10.56862/irajtma.v4i1.179.

Franchetti, S.M.M., Marconato, J.C., 2006. “Polímeros biodegradáveis - uma solução parcial para diminuir a quantidade dos resíduos plásticos”. Quim Nova 29, 811–816. https://doi.org/10.1590/S0100-40422006000400031.

Gadaleta, G., Notarnicola, M., De Gisi, S., 2024. “Impacts of techniques for plastic waste management, in: Reuse of Plastic Waste in Eco-Efficient Concrete”. Elsevier, pp. 37–62. https://doi.org/10.1016/B978-0-443-13798-3.00018-8.

Ibrahim, I.A., Rawindran, H., Alam, M.M., Leong, W.H., Sahrin, N.T., Ng, H.-S., Chan, Y.J., Abdelfattah, E.A., Lim, J.W., Aliyu, U.S., Khoo, K.S., 2024. “Mitigating persistent organic pollutants from marine plastics through enhanced recycling: A review”. Environ Res 240, 117533. https://doi.org/10.1016/j.envres.2023.117533.

Idris, M., Abdul Rasid, A.F., Mohd Zamberi, M., Zhang, Y., 2024. “Biodiesel Production from Waste Cooking Oil: A Review of Prospects and Challenges”. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 124, 28–52. https://doi.org/10.37934/arfmts.124.1.2852.

Nehe, S., Praveen, Dr.B.M., 2025. “Advancement Approach of Waste Utilization for Composites Fabrication”. International Journal of Basic and Applied Sciences 14, 12–25. https://doi.org/10.14419/8navrh78.

Rangel-Buitrago, N., González-Fernández, D., Defeo, O., Neal, W., Galgani, F., 2024. “Rethinking plastic entrapment: Misconceptions and implications for ecosystem services in coastal habitats”. Mar Pollut Bull 205, 116665. https://doi.org/10.1016/j.marpolbul.2024.116665.

Reddy, S., Raju, T., 2018. “Design and Development of mini plastic shredder machine”. IOP Conf Ser Mater Sci Eng 455, 012119. https://doi.org/10.1088/1757-899X/455/1/012119.

Viaene, J., Reubens, B., Willekens, K., Van Waes, C., De Neve, S., Vandecasteele, B., 2017. “Potential of chopped heath biomass and spent growth media to replace wood chips as bulking agent for composting high N-containing residues”. J Environ Manage 197, 338–350. https://doi.org/10.1016/j.jenvman.2017.03.086.

Unduhan

Diterbitkan

2025-08-30

Cara Mengutip

Lubis, R. P. R. ., & Iswandi, I. (2025). Proses Pembuatan Mesin Pencacah Polimer Komposit Kapasitas 10 kg/Jam. IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA), 4(2), 33–36. https://doi.org/10.56862/irajtma.v4i2.284

Terbitan

Bagian

Komunikasi Pendek